聚合物表面静电性能的离子束改性

用150Kev的Ar~-离于在中等剂量F辐照特种聚氯乙烯(RPVC)和有机玻璃(PMMA),能使材料表层静电特性得到显著改变。在相同条件下,摩擦起电量从1.24nc/cm~2下降到0.02nc/cm~2以下,起电电位从800～1000V下降到0～50V,静电半衰期从数小时降到1秒以下,表面电阻率下降四个数量级以上。适当选择注入条件,能够产生具有抗静电特性的新材料。本文讨论了改性机理和测试问题。     

并行程序设计语言在串行机上的编译实现

目前,诸如Fortran 8x 程序设计语言中已经引入了并行运算成份。这给普通串行(标量)机上实现编译器带来了困难。本文提出了数组(矩阵)运算串行化的概念,并给出了串行化的判别准则及算法。     

桅杆首阶固有频率控制与构形设计

基于Timoshenko梁理论,提出筒形桅杆首阶固有频率控制设计原理。依据该原理,采用Transfer matrix算法,研究了直壁式、外凸式及双曲式三种构形的桅杆首阶固有频率的变化规律,发现在桅杆高度、质量、顶部及底部截面边长相同的情况下,外凸式构形具有最大的首阶固有频率值。     

二羟基苯氧基硅烷合成途径设计及产物表征

用Hyperchem 7.0软件的半经验分子轨道法(Semi-empirical-AM1)和分子力学(Molecular Dynamics)法计算了二羟基苯氧基硅烷不同合成过程反应的焓变,对反应途径进行优选,计算了产物的IR谱图,并与实验结果进行了对比。研究表明,以对苯二酚与二乙氧基硅烷进行反应制备二羟基苯氧基硅烷在热力学上是有利的,可得到目标产物;Hyperchem 7.0软件用于新型有机硅化合物合成途径优化及产物表征具有一定的应用价值。     

风场的科学计算可视化在导弹射击中的应用

在导弹射击时,消除风会对导弹飞行造成不利的影响,因此基于可视化分析的研究模型、流程等,利用科学计算方法直观分析优点对风的大小和方向进行分析,并采用开放图形接口对实验风场数据进行了三维图形绘制以提高导弹打击目标的精度,对实际中导弹的风场阻力研究有一定的指导意义.     

五参数寿命分布S(α,β,λ,μ,δ)

在四参数寿命分布的基础上增加了一个非中心参数,进而提出五参数寿命分布S(α,β,λ,μ,δ),并给出了定义、基本性质及其证明。     

数据光滑的一种新方法

提出了用变形的Fourier部分和来代替Fourier级数将输入数据光滑的一种新方法。该方法能稳定地解某些不适定的问题,如给定函数的近似,求函数微分的问题;Laplace方程Cauchy问题;时间逆向热传导方程的Cauchy问题等。     

Experimental and numerical investigation of zirconium jet performance with different liner shapes design

This paper studies the shaped charge jet performance in terms of different liner shapes including conical,bell,hemispherical and bi-conical liners.The critical angles and the relevant flow velocities for the zir-conium liner material were calculated analytically and numerically using Autodyn hydro-code.The relationship between the critical collapse angle and the flow velocity was determined for the conditions of jet formation and coherency.Penetration tests according to the standard testing procedures of API-RP34 (Section-Ⅱ) were performed to validate the numerical predictions of the jet performance of the studied liners.It was found that the four shaped charge liners all produced coherent jets with different performances.The penetration depth of the shaped charges with the bell and the bi-conical liner shapes increased by 10.3％ and 22％,respectively,while the crater diameter of shaped charge with hemispherical liner increased by 85％ representing the formation of an explosively-formed-projectile (EFP),when they are compared with the corresponding jet characteristics of a conical liner shaped charge.     

基于流场特性的管内检测机器人的外形优选研究

管道内检测机器人的结构形状是影响其运动学、动力学特性的关键因素,在机器人设计中占有重要地位。在合理提出一些基本假设后,用二阶迎风差分格式离散管道内检测机器人附近流场的控制方程,并用SIMPLE算法求解,得到了7种不同形状的管道内检测机器人所受的差压驱动力及其周围的流场信息,并对这几种结构的CFD特性作了比较。最后综合空化条件、驱动力、腔内有效体积和加工难度等因素,确定了上游半球形结构为设计形状。     

A general approach to the shape of failure rate and MRL functions

Failure rate and mean residual life are two important characteristics for studying reliability of products. In literature, some work studied the shape of failure rate function based on the knowledge of the associated probability density function; some other work investigated the shape of mean residual life function based on the shape of the associated failure rate function separately for continuous case and discrete case. In this article, a general approach is developed which can be applied to the aforementioned studies. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004